HK$ 5,199.00
Tenlog TL-D3 Pro IDEX is a Dual Extruder 3D Printer equipped with dual Bondtech Mini Geared (BMG) extruders, enables dual colours and dual materials printing. 3D printers with dual extruders are often larger and more expensive, while Tenlog managed to make it compact and affordable as an entry choice.
Here is the list of the features:
This item is available on backorder. Please allow 7 – 21 days for delivery of this item
List of features:
Dual materials
Duplicate printing
Mirror printing
Photoeletric sensors
Filament run-out sensor
Power loss recovery
TL-D3 Pro comes with Bondtech Mini Geared extruders. By the Independent Dual Extruder (IDEX) technology, you can print two colours or materials with different settings simultaneously. Temperature, Extruder Speed, Printing Speed, and Infill Density can be set individually for each nozzle. It enables the possibility to mix different colours into one single print, and different materials such as water soluble material (e.g. PVA) as support.
You can use the Duplication mode and Mirror mode with different colours/ materials to make your life easier.
The printer saves the last position in the flash memory to recover from short time power loss.
The printer pauses when the sensor detects brokage of filament, which lets you to refill and resume so you don’t have to restart again.
TL-D3 Pro installed a self-developed silent motherboard with TMC2209 Driver, which has stronger anti-interference, more stable and faster motion performance.
| Weight | 16 kg |
|---|---|
| Dimensions | 590 × 520 × 760 mm |
| Brand Origin | |
| Build Size | |
| Filament Material | |
| Filament Sensor | |
| Slicing Software | |
| Made In | |
| Connectivity | |
| Extruder Config | Bondtech Mini Geared (BMG™) Extruder, Direct Drive, Dual Extruder |
| Layer Resolution | |
| Heatbed Temperature | |
| Nozzle Temperature | |
| Print Head | |
| Build Surface Type | |
| Filament Diameter | |
| Print Recovery | |
| Printing Technology | |
| Z Axis | |
| Variation | |
| Bed Leveling | |
| Silent Driver | |
| Power Requirement |
https://ultimaker.com/software/ultimaker-cura
Ultimaker Cura is developed by Ultimaker, a 3D printer manufacturer.
The software is free and super powerful with tons of options.
The community is very big so there are a lot of free plugins available to make the 3D printing more interesting.
This item is available on backorder. Please allow 7 – 21 days for delivery of this item
繁體中文
Reviews
There are no reviews yet.