3D Printing FAQ

3D Printing FAQ

We would recommend Cura from Ultimaker as it is free and quite easy to use.

https://ultimaker.com/software/ultimaker-cura

ideaMaker from Raise3D is also a great choice, its launching speed is super fast and it is also free.

– Retraction setting has not been fine tuned

– The filament is too wet. Hong Kong has high humidity, the moisture in the air can be absorbed by the filament. Dry it with dehumidifier or something like camera box.

– Another reason is about the calibration, try this below:

If you feel you have got some problems with your print but you can’t describe it, check this website below. Bookmark it. There are photos for you to match your problem and you will  be able to find an answer.

https://all3dp.com/1/common-3d-printing-problems-troubleshooting-3d-printer-issues/

Being successful in 3D printing, first thing first, do your leveling right.

You can print PLA/ TPU/ ABS/ PETG with a stock Artillery Genius. You can print more like PC, Nylon if you wish but you will need to modify the printer by uploading Marlin 2.X and TFT to unleash the beast. To modify it you will need to get access to the board and you will void the warranty.

You can find us to modify or you take your own risk. Reminder: No matter who is the one who modify the printer, the manufacturer will only provide limited warranty thereafter, if there is any malfunctioning afterwards produced by the modification, the manufacturer can reject the warranty.