- Diameter: 1.75 & 2.85 mm (±0.05 mm)
- Weight: 600g filament + 230g spool
- Length: 243m (1.75mm), 94m (2.85mm)
Fillamentum Nylon CF15 Carbon Filament
Nylon CF15 Carbon Filament is made of polyamide 12 reinforced with 15 % of milled carbon fibers. It is characterized by high strength, high thermal and chemical resistance, great processing stability, and rheological properties. The material is suitable for the production of continually stressed parts, such as bearings, cogwheels, reinforcement parts, etc.
Features:
- Mechanical properties retained also under low temperatures
- Wear resistance
- Suitable for printing continually stressed parts
- Stiffness & strength
- Creep resistance (resistance against deformation under long-term load)
- Great temperature resistance
- High hardness
- Nice & smooth surface
- Low density
- Chemical resistance against a wide range of substances
- Improved tensile strength
- Low thermal expansion
- Safe to use in electrical and electronic equipment
Always use gluestick (Elmer’s, Deli得力, or Magigoo recommended by Fillamentum) for ideal bed adhesion! Because of great adhesion to other materials, plastics, composites, and glass, it can damage your bed without a separate layer of adhesive.
Highly moisture sensitive, dry 4 hours before use and keep in a protective sachet. If the stringing occurs, re-dry the filament.
Hot Chamber / enclosure recommended
[Drying filaments before processing]Tech Specs of Fillamentum Nylon CF15 Carbon Filament
Material type | FDM Nylon CF15 Carbon |
Tolerance | ± 0.10 mm |
Print Temperature | 235°C-260°C |
Heated Bed Temperature | 80°C-105°C |
Net Weight | 600g per Spool |
Material density | 1.08 g/cm3 |
Tensile strength | 54.5 MPa |
Elongation | 103% |
Tensile modulus | 500 MPa |
Charpy impact resistance | 86.2 kJ/m2 |
Hardness | 75 Shore D |
Drying Time | 4 hours |
Drying Temperature | 80 °C |
Drying Importance | Very High |
Moisture Affects | Stringing, Mechainical Properties |
Reviews
There are no reviews yet.