- Diameter: 1.75 & 2.85 mm (±0.05 mm)
- Weight: 600g filament + 230g spool
- Length: 200m (1.75mm), 80m (2.85mm)
Fillamentum CPE CF112 Carbon Filament
Fillamentum CPE CF112 Carbon Filament is carbon-fiber-reinforced CPE HG100 optimal for applications with long-term loads. This filament is developed for its pressure resistance, hardness, and surface effect. The contained fibers ensure functionality, great printability, dimensional stability, and layer adhesion. The printed objects have a nice smooth surface.It has higher wear resistance, heat distortion temperature, hardness, and chemical resistance in comparison with CPE HG100.
Features:
- High-technical durable long-life material
- Good interlayer adhesion
- Creep resistance (resistance against deformation under long-term load)
- Matte finish
- Wear resistance
- Temperature resistance up to 100 °C
- High hardness
- Chemical resistance against acids, alkalis, alcohols
- Easy printing
- Low warping
- Recyclable
- 25% Bio-based
- BPA-free & styrene-free
- Safe to use in electrical and electronic equipment
Tech Specs of Fillamentum CPE CF112 Carbon Filament
Material type | FDM CPE CF112 Carbon Filament (Modified PETG) |
Tolerance | ± 0.10 mm |
Print Temperature | 255°C-275°C |
Heated Bed Temperature | 70°C-85°C |
Net Weight | 600g per Spool |
Material density | 1.16 g/cm3 |
Tensile strength | 52.4 MPa at yield 50mm/min, 37.7MPa at break 50mm/min |
Elongation | 8% |
Tensile modulus | 2200 MPa |
Charpy impact strength | 105.9 kJ/m2 |
Hardness | 77 Shore D |
Glass transition temperature | 90 °C |
Resistance against acid, alkalies, alcohols | Good |
Resistance against water, acetone, oils, greases, car fluids, ozone | Medium to low |
Drying Time | 5 hours |
Drying Temperature | 75 °C |
Drying Importance | Very High |
Moisture Affects | Stringing, Mechainical Properties, Oozing |
Reviews
There are no reviews yet.