Creality LD-002R LCD Resin 3D Printer
Creality LD-002R LCD Resin 3D printer is a new product based on LD-002. The printing principle is the same. It adopts the “LCD selective area light transmission principle” shaping technology. The LD-002R 3D printer integrates many functional technologies in printing accuracy, printing speed and product functions, and has nine high-end configurations, making the new LD-002R available for more market choices and can be more widely used in denture dentistry and jewelry, animation, and other application scenarios.
Featuring a 2K solid-state display system of 2560×1600 pixels for its masking of the UV light source, it is truly capable of providing 10 times higher precision than FDM 3D printers. LD-002R adopts a much sturdier frame structure with a new ball-type linear module, which is helpful for Z-axis stability, ensuring accurate position during the printing process. To further improve the print quality, the machine supports 4X/8X anti-aliasing that can reduce staircase aesthetic effects on prints, delivering more detailed models. Therefore, LD-002R is quite capable of delivering high-resolution resin 3D prints.
Based on its predecessor LD-002, LD-002R revolutionizes its appearance with an oblique 3.5in color touch screen. Better yet, it utilizes ChiTuBox slicer fast slicing 30Mb STL model files within 1 minute. ChiTuBox allows hollowing out a model before slicing which could save resin dramatically during the photocuring process. With the combination of ChiTuBox, users can also enjoy the function of automatically and manually adding support structures to objects, letting go of problems caused by suction or weak support.
Creality LD-002R LCD Resin 3D Printer Advantages
2K screen final prints with fine texture
0.01-0.05mm precision
4x/8x Anti-aliasing
5.5 inch LCD printing screen printing volume 119x65x160mm
Print speed at 20-30mm/h
Air purification
Ball linear rails smooth Z-axis travel
Quick leveling
All-new resin vat structure
Highlights of LD002R
Build and Motion
Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
Air Filter
A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.
Quick Leveling
Quick leveling in the sense that the machine will lower the print plate to the vat for you. Four hex screws feature on the print plate — loosen them before lowering the plate, and it will align to the level of the screen. Tighten it and you’re good to go.
Perforated Print Plate
Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.
Anti-Aliasing
MSLA(Masked stereolithography) 3D printers use a LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
2K Micron-level accuracy. Elaborate final prints
2K Solid-State Display System achieves precision of 0.01-0.05mm, producing smooth surface and delicate finish. The single spot is of 26.1μm², and its precision can rival industrial-grade machine.
2K resolutions (1440x2560px)
0.01-0.05mm print precision
Uniform light greatly improves precision
LD002R adopts the 405nm wavelength UV light source LCD light bulbs in parallel matrix provide uniform light with light evenness up to 90% reflective cup improves light concentration and even illumination. Stable light source decides print success rate.
90% Light Evenness
30% Higher Precision
LCD shaping technology multi-task at a same time
Compared to FDM, LCD technology supports multi-task printing at the same time, greatly improving work efficiency, with average print speed at 6-18 seconds per layer, and highest print speed at 30mm per hour.
LD-002R Unboxing and Printing
For Manuals and Firmware, please check Creality Website
Reviews
There are no reviews yet.