LD-002R 的強大構建質量及其運動系統組件受到了極大的重視，該系統由滾珠絲槓和 Z 軸的直線滑軌支撐。

打印室後部的一個小盒子中裝有一袋活性炭。 這有助於從空氣中去除部分曝露空氣中樹脂的惡臭。

快速調平，機器會為您將印版降低到樹脂缸中 印刷板上有四個六角旋扭 – 在降低印刷板之前鬆開它們，它將與螢幕水平對齊。 擰緊它，你就可以開始了。

Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.

MSLA(Masked stereolithography) 3D printers use a LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.