- 8 different colours
- True transparent colour, which the object can really be seen through
- Metal container with air tight seal enhence storage storage time
- Low shrinkage rate, accuracy print size
- Shake up the bottle before use and avoid direct sunlight and dust.
- Do not drink it and keep it out of the reach of children.
- We suggest you wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation
- If feel discomfort after you got skin contact, please see a doctor ASAP.
- Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least.
- If you don’t use the resin please do not leave them in the resin tank over 48 hours.
Resin filtration when:
- A print has failed, either completely or partially
- Layers or pieces of cured resin stick to the bottom of the tank
- Particles are visible in the tank
- Replacing the resin tank
Please refer to the procedure at https://support.formlabs.com/s/article/Resin-Filtration?language=en_US
- Filament Material Type
- Print Technology
- Country of Origin
- Reference Code