Polymaker PolyLite PC (formerly PC-Plus™)
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.
PolyLite PC is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties.
Print Settings
Nozzle Temperature:
250˚C – 270˚C
Printing Speed:
30mm/s – 50mm/s
Bed Temperature:
90˚C – 105˚C
Bed Surface:
Magigoo PC, Buildtak
Cooling Fan:
OFF
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
Mechanical Properties
Young’s Modulus:
2307 ± 60 Mpa
Tensile Strength:
62.7 ± 1.3 Mpa
Bending Strength:
100.4 ± 2.7 Mpa
Shore Hardness:
3.4 ± 0.1 kJ/m2
Thermal Properties
Glass Transition Temperature:
113˚C
Vicat Softening Temperature:
119˚C
Melting Temperature:
N/A
Notes
Drying Settings:
75˚C for 6h
Recommended Support Materials:
PolySupport
Other:
When printing with PolyLite™ PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Annealing settings: 90˚C for 6h
Reviews
There are no reviews yet.