MakerBot Tough
Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness. An added benefit over PLA is its durability, pliability, and machinability which makes it perfect for snap fits and assemblies.
TECH SPECS | Imperial | Metric |
---|---|---|
Heat Deflection (ASTM 648, 66 psi) | 125-120°F | 52-49°C |
Flexural Modulus (ASTM D790, 15 mm/min) | 377,000 psi | 2,600 MPa |
Tensile Strength at yield (ASTM D638, 50 mm/min) | 5,080 psi | 35 MPa |
Tensile Modulus (ASTM D638, 50 mm/min) | 406,000 psi | 2,800 MPa |
Strain at Yield – Elongation (%) | >52.7% | >52.7% |
Notched Impact Strength (ASTM D256) | 4.12 ft-lb/in | 220 J/m |
Reviews
There are no reviews yet.