Creality UV Resin

• Shake up the bottle before use and avoid direct sunlight and dust.
• Do not drink it and keep it out of the reach of children.
• We suggest you wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation
• If feel discomfort after you got skin contact, please see a doctor ASAP.
• Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least.
• If you don’t use the resin please do not leave them in the resin tank over 48 hours.

Resin filtration when:

1. A print has failed, either completely or partially
2. Layers or pieces of cured resin stick to the bottom of the tank 
3. Particles are visible in the tank
4. Replacing the resin tank

Please refer to the procedure at https://support.formlabs.com/s/article/Resin-Filtration?language=en_US