Fillamentum CPE CF112 Carbon is carbon-fiber-reinforced CPE HG100 optimal for applications with long-term loads. This filament is developed for its pressure resistance, hardness, and surface effect.
Features:
Always use gluestick (Elmer's, Deli得力, or Magigoo recommended by Fillamentum) for ideal bed adhesion! Because of great adhesion to other materials, plastics, composites, and glass, it can damage your bed without adhesive.
Highly moisture sensitive, keep in a protective sachet. If the stringing occurs, re-dry the filament.
Product Description:
Fillamentum CPE (co-polyester) CF112 Carbon is a high-technical material for the FFF (also known as FDM) 3D printing technology.
Carbon fibers reinforced CPE HG100 filament is developed for its pressure resistance, hardness, and surface effect made it a very good material for specific technical prints.
 |
| Material type | CPE CF112 (Modified PETG, Carbon Fibre reinforced) |
| Tolerance | ± 0.1 mm |
| Print Temperature | 250°C-270°C |
| Part cooling fan | 0 – 15 % |
| Heated Bed Temperature | 70°C-85°C |
| Heated Bed Surface | PEI, mirror/ glass |
| Adhersive | Glue stick, 3DLac, PVA glue |
| Raft / skirt / brim | Skirt / Brim 5 mm |
| Heated chamber / enclosure | Not needed |
| Print Speed | 20 - 40 mm/s |
| Net Weight | 600g per Spool |
| Material density | 1.16 g/cm3 |
| Tensile strength | 52.4 MPa |
| Elongation | 8% |
| Charpy impact strength | 105.9kJ/m² |
| Hardness | 77 Shore D |
| Resistance against acids, alkalis, alcohol | Good |
| Drying Time | 3 hours |
| Drying Temperature | 75 °C |
| Need To Dry | High Importance |
| Moisture Affects | Stringing, MP, temperature and chemical resistance, bubbles, foamy appearance of printed object |
You might also like
