Fillamentum CPE (co-polyester, Modified PET-G) is a high-technical material with a bonus of food contact safety. Printing is easy and with nice detailed results. Besides others, it has very high hardness, impact resistance and chemical resistance. It has what PETG features and improved properties. For everybody, who needs high quality with functional properties.
Features:
Always use gluestick (Elmer's, Deli得力, or Magigoo recommended by Fillamentum) for ideal bed adhesion! Because of great adhesion to other materials, plastics, composites, and glass, it can damage your bed without adhesive.
Highly moisture sensitive, keep in a protective sachet. If the stringing occurs, re-dry the filament.
You might also like
Product Description:
Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.
Engineered for quality and easy printing with features that will dwarf all PET based materials.
Made from modified PETG material which is developed for technical prints with nice detailed results. Additional monomer improves all the properties when compared with PETG filaments.
Its high hardness, impact and chemical resistance, and the food contact safety charactertistic made it a very good material for specific technical prints.
 |  |
| Material type | FDM CPE (Modified PETG) |
| Tolerance | ± 0.05 mm |
| Print Temperature | 255°C-275°C |
| Part cooling fan | 0 – 15 % |
| Heated Bed Temperature | 70°C-85°C |
| Heated Bed Surface | PEI, mirror/ glass |
| Adhersive | Glue stick, 3DLac, PVA glue |
| Raft / skirt / brim | Skirt / Brim 5 mm |
| Heated chamber / enclosure | Not needed |
| Print Speed | 40 - 60 mm/s |
| Net Weight | 750g per Spool |
| Material density | 1.25 g/cm3 |
| Melt flow index | 1.6 g/10 min |
| Tensile strength | 47 MPa |
| Elongation at break | 150% |
| Flexural strength | 71 MPa |
| Flexural modulus | 1860 MPa |
| Izod impact strength | no break |
| Glass transition temperature | 90 °C |
| Heat distortion temperature | 80 °C |
| Drying Time | 5 hours |
| Drying Temperature | 75 °C |
| Need To Dry | High Importance |
| Moisture Affects | Stringing, MP, temperature and chemical resistance, bubbles, foamy appearance of printed object |
