PC-Plus™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PC-Plus™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.
PC-Plus™ PC is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties.
250˚C – 270˚C
30mm/s – 50mm/s
90˚C – 105˚C
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
2048 ± 66 Mpa
59.7 ± 1.8 Mpa
94.1 ± 0.9 Mpa
Charpy Impact Strength:
25.1 ± 1.9 kJ/m2
Glass Transition Temperature:
Vicat Softening Temperature:
80˚C for 8h
Recommended Support Materials:
When printing with PC-Plus™ PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Annealing settings: 100˚C for 2h