PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
PolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality. It is the ideal choice for a wide range of engineering applications.
250˚C – 270˚C
30mm/s – 50mm/s
90˚C – 105˚C
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
2048 ± 66 Mpa
59.7 ± 1.8 Mpa
94.1 ± 0.9 Mpa
Charpy Impact Strength:
25.1 ± 1.9 kJ/m2
Glass Transition Temperature:
Vicat Softening Temperature:
80˚C for 8h
Recommended Support Materials:
When printing with PolyMax™ PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Annealing settings: 100˚C for 2h