Creality CR-10 V3 3D Printer – Enhanced Titan Direct Drive

HK$ 3,999.00

Creality released their CR-10 V3 with improvements on stability compare to their V1, highlighting their direct drive which was not available on V2.

Quick Note: Some customers asked about what is the difference between V3 and V2, and is it necessary to upgrade. Frankly, the upgrade from V2 to V3 is insignificant, if you own a V2 you do not need to upgrade to V3. The only difference between V2 and V3 is the extruder from Bowden to Titan Direct Drive.

  • Direct feed system
  • Using genuine E3D titan extruder
  • All metal hot end
  • Dual cooling fan outlet for better heat-dissipated
  • Filamnent sensor enable print resume after run ot of filament
  • Mean Well 350W power supply
  • Reinforced side braces provided a stiff structure

Out of stock

SKU: M-CRE-CR10-V3 Category: Tags: , , , , , , ,
Creality CR-10 V3 3D Printer

CR-10 V3 3D Printer

Creality released their CR-10 V3 with improvements on stability compare to their first generation predecessor, highlighting their direct drive which was not available on V2. Here are the highlights of this version:

Dual Port Hot Port Cooling Fans: Dual-port cooling fan extruder. Every heat-dissipated and cooling down immediately, reducing plugging and poor-spillage ensure models with high quality.

Titan Direct Drive: The 3d printer equipped with genuine Titan Direct Drive, the torque of the stepper motor is lower. Its more precise to control the feed-in filament, great at printing the soft filament like TPU.

TMC2208 Motherboard: Upgraded ultra-silent motherboard, this Creality 3d printer is more cost-effective and running more stable.

Manual Leveling(Changeable auto-leveling):BL touch(Auto-Leveling Device)can be added by yourself, enjoying more fun of DIY your own Creality 3d printer

Resume Printing Function: Recover from potential print failures before they happen

Filament Sensor(Optimize Structure): This design in Creality 3d printer will save your filaments when a strike occurs.

24V Branded Power Supply: The Creality CR-10 V3 3D printer, solid 350W branded power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100℃.

Dual Z Axes

Branded New UI

Creality CR-10 V3 3D Printer

Improvements from CR-10, CR-10 V2 To CR-10 V3

CR-10 CR-10 V2 CR-10 V3
One Port Hot End Cooling Fan Dual Port Hot Port Cooling Fans Dual Port Hot Port Cooling Fans
Bowden Extruder Bowden Extruder (Changeable Titan Direct Drive) Titan Direct Drive
Normal Drive TMC2208 Motherboard TMC2208 Motherboard
Manual Leveling Manual Leveling (Changeable auto-leveling) Manual Leveling (Changeable auto-leveling)
Plastic Extruding Kit All-metal Extruding Kit All-metal Extruding Kit
No Resume Printing Function Resume Printing Function
No Filament Sensor Filament Sensor (Optimize Structure)
12V Ordinary Power Supply 24V Branded Power Supply 24V Branded Power Supply
Single Z-axis Dual Z-axis Dual Z-axis
Normal UI Brand New UI Brand New UI

CR-10 V3 vs CR-10 V2 Difference

Please note the only difference between V3 and V2 is Direct Drive vs Bowden Extruder

Creality CR-10 V3 3D Printer compares to V2
Creality CR-10 V3 3D Printer Metal Hot End

All-metal Hot End

Creality CR-10 V3 3D Printer V-shape

High-standard V-Shaped Profile

Creality CR-10 V3 3D Printer Dual cooling fan

Dual Port Cooling Fans

Ultra quiet TMC2208 motherboard

Creality CR-10 V3 3D Printer Resume Printing

Power Resume Filament Sensor

Creality CR-10 V3 3D Printer Branded Power Supply

350W Branded Power Supply

Creality CR-10 V3 3D Printer BL touch ready (not inclu.)

BL-Touch Supported (Not Included)

Creality CR-10 V3 3D Printer Titan Direct Drive

Titan Direct Drive Great At Printing TPU

Creality CR-10 V3 3D Printer Triangular structure

Firm Triangular Structure

Titan Direct Drive

Equipped with genuine Titan direct drive, the torque of the stepper motor is lower. It is more precise to control the feed-in filament, great at printing the soft filaments like TPU.

Creality CR-10 V3 3D Printer Titan Direct Drive
Creality CR-10 V3 3D Printer Titan Direct Drive

Proven Performance Branded Power Supply

Solid 350W branded power supply pairs with thermally efficient bed heater. Allows for rapid heating to 100°C

350W +30%
Quality Branded Power Supply Heating Speed-up
Creality CR-10 V3 3D Printer Branded Power Supply

A New Touch All Metal Frame

High quality V-Profile selected, more stable without any vibration, smoothly printed-out with high accuracy.

Creality CR-10 V3 3D Printer Metal Frame

Triangle Structure Remarkably Stable

Ensure a solid dimensional stable work platform

Creality CR-10 V3 3D Printer Triangular structure

Ultra Silent Motherboard

Self-developed industrial-graded motherboard and TMC2208 ultra silent drive and adopted. Cost-effective, running more table, noise reduction, compression resistance.

Creality CR-10 V3 3D Printer Silent mother board

Resume Printing Function

Recover from potential print failures before they happen

Filament Breakage Sensor

Save your filaments when a strike occurs.

Creality CR-10 V3 3D Printer Filament Sensor
Creality CR-10 V3 3D Printer Filament Sensor

Dual Port Fan Cooling

Dual-port cooling fan extruder, evenly heat-dissipated and cooling down immediately. Reducing plugging and poor-spillage ensures models with high quality.

+55% 30°C +10%
Cooling improvement Transport tube temperature Overall printing precision
Creality CR-10 V3 3D Printer Dual cooling fan

Carborundum glass platform

High hardness carborundum increases viscosity and reduces warping.

Creality CR-10 V3 3D Printer Carborundum Glass

Strong Compatibility. Auto & Manual Leveling

Strong Compatibility
Auto & Manual Leveling

Creality CR-10 V3 3D Printer BL touch ready (not inclu.)

CR-10 V3 3D Printer Assembly and Operation

Creality CR-10 V3 Specs DESCRIPTION
Layer Thickness 0.1-0.4mm
Product Dimensions & Weight (W x D x H) 420 x 550 x 650 mm
Maximum Build Volume (W x D x H) 300 x 300 x 400 mm
Printing Technology FDM
Print Precision 0.1mm
Hotbed Temperature <=100°C
Filament Diameter 1.75mm
Support Materials PLA, TPU, PETG, ABS
Connectivity SD, Micro USB
Slicing software Simplify3d, Cura

Creality CR-10S Pro V2 3D Printer Official Product Page
More reviews in our blog

Bed Leveling

Bed Leveling Sensor

Brand Origin

Connectivity

,

Extruder Config

,

Filament Diameter

Build Size

Filament Material

, , , ,

Filament Sensor

Heatbed Temperature

Layer Resolution

Made In

Nozzle Temperature

Power Requirement

Print Head

Print Recovery

, ,

Printing Technology

Slicing Software

, , ,

Z Axis

Print Speed

,

Silent Driver

Build Surface Type

Brand

Creality

Founded in 2014, Shenzhen Creality 3D Technology Co., Ltd. focuses on the design, research, production of 3D printers and 3D printing related products. Consisting of professional researchers and skilled engineers, our R&D team constantly strives for creative function and excellent user experience. The company’s R&D investments on 3d printing cover FDM/resin 3D printers, 3D scanners, filaments, resin, as well as 3D printed drones and robots that back up STEAM education.
Creality - Popular 3D Printer brand from China

Software

SLICERS

Ultimaker Cura

https://ultimaker.com/software/ultimaker-cura

Ultimaker Cura is developed by Ultimaker, a 3D printer manufacturer.
The software is free and super powerful with tons of options.
The community is very big so there are a lot of free plugins available to make the 3D printing more interesting.

Manual & Firmware

https://www.creality.com/download

Reviews

There are no reviews yet.

Be the first to review “Creality CR-10 V3 3D Printer – Enhanced Titan Direct Drive”

This site uses User Verification plugin to reduce spam. See how your comment data is processed.
Creality CR-10 V3 3D Printer
Creality CR-10 V3 3D Printer – Enhanced Titan Direct Drive

Out of stock