Wham Bam Powder Painted PEI Flexi Plate 235*235mm
This Powder Painted PEI Flexi Plate provide great adhesion, which allows you to print ABS / PETG etc easily just like a click.
Glue Stick, Masking Tape, Hair Spray... etc? Throw them away after you have this.
- Print Technology
- FDM / FFF
- Supported Materials
- Country of Origin
- Reference Code
WhamBam start with our original high chromium spring steel Flexi Plates, powder paint them with PEI and bake them in a kiln. The PEI Powder Painted Flexi Sheets have a pronounced texture and give the bottom of your part a fantastic finish! The plates are coated on both sides, so you can save one side for pristine parts while you abuse the other side. Works perfectly with your Wham Bam magnetic base! The Flexi Plate is 0.6mm thick.
It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough to stick filaments like Nylon, feel free to use purple glue sticks or Magigoo, they will wash off with water after use.
To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature.
*Please confirm bed size on your actual machine prior to ordering. Addify and Wham Bam are not responsible for mistaken sizes ordered. See Wham Bam's sizing guide here.
For more information on this product, click here to Wham Bam official website: Flexible Build System
Flexible Build System - Great First Layer and Pops Right Off!
You might also like