Filter

3DXTECH 3DXSTAT ESD PETG – Advanced Engineering Filament for Safety

3DXTECH Logo

HK$ 1,038.00

3DXSTAT™ ESD PETG is an easy to use ESD-Safe filament formulated for a wide array of applications that require electrostatic discharge (ESD) protection and enhanced chemical resistance. Made using high flow PETG copolymer and CNT’s to offer exceptional repeatability and reliability.

3DXSTAT™ ESD PETG

3DXSTAT™ ESD-PETG is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection. Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Target surface resistance: 10^7 to 10^9 Ohm.

Extruder Temperature

230-260°C

Bed Temperature

60-90°C

Heat Chamber

Not Required

Nozzle Specs

No Special Concerns

Bed Adhesion

Magigoo Bed Prep

Layer Height

No Special Concerns

Drying Specs

65°C for 4 hours

Supports

Works best with X1 USM Water Soluble Support

Benefits of PETG Includes:

  • Superior chemical resistance vs. ABS
  • Amorphous structure giving it low, near isotropic shrinkage
  • Low moisture absorption, 3x lower than ABS
  • Very low odor emitted while printing
  • Superior ductility vs. ABS
  • Wide processing range of 230-260°C

Benefits of 3DXSTAT™ Includes:

  • Consistent surface resistivity
  • Improved retention of impact & elongation
  • Low particulate contamination
  • Minimal contribution to outgassing and ionic contamination

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.

Typical ESD PETG Applications Include:

  • Semi-con: HDD Components, Wafer Handling, Jigs, Casings, & Connectors
  • Industrial: Conveying, Metering, and Sensing Applications

Target Conductivity for 3DXSTAT ESD PETG:

  • 10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.
  • Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how this filament works in your specific printer / application. However, please do not exceed 270°C to reduce the risk of polymer degradation.

Surface Conductivity as a Function of Extruder Temperature:

The surface resistance of the printed ESD-safe part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 230-260°C
  • Bed Temp: 60-90°C
  • Bed Prep: Magigoo Bed Prep Adhesive and 3DXTECH Polyimide Tape work best for us.
  • Heated Chamber: Not required
  • Supports: Water soluble AquaTek X1 USM works great for complex parts.
  • Drying Instructions: 65°C for 4 hours.

Useful Data Sheets

3DXSTAT ESD PETG Safety Data Sheet

3DXSTAT ESD PETG Technical Data Sheet

Weight N/A
Brand Origin

Colour

Filament Material

Filament Diameter

,

Other Features

Printing Temperature

Filament Weight

,

Brand

3DXTECH

3DXTECH is located in Grand Rapids Michigan. Started in 2014 by focusing on specialty formulations that focus on functionality. 3DXTECH manufactures all of their filaments in a 24,000 ft2 manufacturing facility using state-of-the-art equipment and processes. Their goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications where functionality is king.
3DXTECH Logo

Data Sheet

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

3DXTECH ESD PETG Technical Data Sheet [94.32 KB]

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

3DXTECH ESD PETG Safety Data Sheet [135.76 KB]

Reviews

There are no reviews yet.

Be the first to review “3DXTECH 3DXSTAT ESD PETG – Advanced Engineering Filament for Safety”

This site uses User Verification plugin to reduce spam. See how your comment data is processed.
3DXTECH ESD PETG
3DXTECH 3DXSTAT ESD PETG – Advanced Engineering Filament for Safety
HK$ 1,038.00 Select options