Artillery Genius Pro 3D Printer
The Artillery Genius Pro 3D Printer has just been launched in Aug 2021, now featuring a 32 bit motherboard and an auto bed leveling inspired by the famous BLTouch originally from Antclabs. The Genius Pro is same as its predecessor Genius, which has 220 x 220 x 250mm print size, equipped with Titan Direct Drive, Dual Z axis, Ultra-Quiet Stepper Motor, Rapid Heat Bed, TFT Touch Screen, Fast Printing, Filament Sensor, USB Slot , but should be more stable theoretically when the 32 bit motherboard would certainly do a better job with more functions on the Marlin 2.0.x. (Genius was 8 bit / Marlin 1.1.9)
Highlights of Artillery Genius Pro 3D Printer
- Titan Direct Drive with Volcano Hot End – Genius Pro uses direct feed with force multiplier extruder and high flow rate volcano hot end for fast and flexible print.
- Rapid AC Heat Bed – Rapid heating up to over 80°C in 2 minutes
- Synchronized Dual Z-axis – High speed and stable movement
- Auto Bed Leveling – leveling sensor preinstalled
- Quiet Stepper Driver – Exclusive stepper driver provide silent printing (you can change to even quieter stepper driver)
- High Speed Printing – Up to 150mm/s
- Easy Assembly – Only 3 parts and 4 screws then good to go
- USB Drive Slot – A feature that most entry level printer does not have
- TFT Colour Touch Screen – Clear and intuitive UI
- 32 bit motherboard – More capacity to handle more process
- Failure Detection – Filament Run-out Sensor for recovery and Resume Printing Function to resume printing in short power outage
- Larger Rotary Knob – Easier to do the leveling
- Clean Cable Management – Looks tidier
- Carborundum glass platform – Steadier temperature
Resume Printing
Auto Bed Leveling
Accessories
Genius Pro Tech Specification
Build Volume | 220x220x250mm |
---|---|
Layer resolution | 0.1mm – 0.35mm |
Build Speed | 60mm/s-150mm/s |
Travel speed | 250mm/s |
Print surface | Glass ceramic |
Heat bed type | AC heat bed |
Extruder | One |
Filament diameter | 1.75 |
Supported materials | PLA, ABS, Flexible materials, Wood, PVA, HIPS |
Calibration | ABL |
Technology | FDM/FFF |
Feeder | Titan Direct Drive |
XYZ resolution | 0.05, 0.05, 0.1mm |
Nozzle type | Volcano |
Nozzle diameter | 0.4mm |
Nozzle temperature | 180-240°C |
Nozzle heat up time | <3 min |
Build plate heat up time | 80°C < 2 min |
Operating noise level | <70 dBA |
Power consumption | 100-240V 500W max |
Control board | Artilery Ruby 32 bit |
Connectivity | Micro SD, USB Drive, USB-B to PC |
Product weight | 9.6kg |
Shipping weight | 11.7kg |
Product dimensions | 430x390x590mm |
Shipping box | 528x428x310mm |
For official product link, you can visit Artillery.
Reviews
There are no reviews yet.