• New
Artillery® Genius 3D Printer
Artillery® Genius 3D Printer
Artillery® Genius 3D Printer
Artillery® Genius 3D Printer
Artillery® Genius 3D Printer
Artillery® Genius 3D Printer
Artillery® Genius 3D Printer

Artillery® Genius 3D Printer

Out-of-Stock
$2,499.00

Artillery® Genius is a Titan Direct Drive 3D printer with 220x220x250mm print size, Dual Z axis, Ultra-Quiet Stepper Motor, TFT Touch Screen and more.

Here are the features and some comments by us after open box:

  • Titan Direct Drive - Direct feed with force multiplier extruder and high flow rate hot end for fast print. TPU flexi print ready.
  • Fast AC Heat Bed - Rapid heating up to over 80°C in 2 minutes
  • Ultra Fast Printing - Maximum Print Speed 150mm/s
  • Synchronized Dual Z-axis - High speed and stable movement
  • Ultra-Quiet Stepper Driver - Exclusive stepper driver provide ultra quiet printing
  • Super Easy Assembly - Only 3 parts and 4 screws then good to go
  • TFT Colour Touch Screen - Clear and intuitive UI
  • Failure Detection - Filament Run-out Sensor for recovery and Resume Printing Function to resume printing in short power outage
  • Larger Rotary Knob - Easier to do the leveling
  • Clean Cable Management - Artillery put efforts into this issue and made the cable super tidy and clean
  • Glass platform - Steadier temperature. Can upgrade to Wham Bam PEX Flex System for better result
  • Now supported by Cura 4.8 - Cura 4.8 and Windows 10 ready, machine and printing profile included in latest Cura
  • Expendable slot for BL touch - Socket is prepared for the optional future upgrade of BL touch
Addify Review: This printer has all the functions that a middle tier printer should have, can be directly compared with CR-6 SE and even better. A  disadvantage of this printer is a smaller user community due to it is still brand new. In fact, there wasn't even a community of Creality back in the old days. So, if you ask us you should buy Genius or Creality Ender 3 Pro or V2? To be honest Ender 3 V2 can hardly compare to this machine with all Genius's functionalities. Which one you should buy? It depends on your concerns.

 

Description:

Print Technology
FDM / FFF
Supported Materials
ABS
Flexible Materials
Flexible materials
PLA
TPU
Machine Size
430 x 390 x 740 mm
Filament Diameter
1.75
Country of Origin
China
Printing Size
220 x 220 x 250mm
Power
400W (With heatbed on)
Connectivity
Micro SD Card
USB
Slicing Software
Cura
Reptier-Host
Simplify3D
Heatbed Temperature
130°C
Nozzle Temperature
≤240°C
Motherboard
Silent
Voltage
110V/220V 4A/2.1A Output 24V
Print Speed
150mm/s
Resume Printing
Yes
Weight
8.9kg
Extruder Type
Titan Direct Drive
Nozzle Type
Volcano
Reference Code
M-ART-GENS-FDM-V1
No reviews

Artillery® Genius - Ultra Quiet 3D Printer

The things make Genius a genius

Artillery® Genius is a Titan Direct Drive 3D printer with 220 x 220 x 250mm print size, Dual Z axis, Ultra-Quiet Stepper Motor, TFT Touch Screen and more.

Here is the features and some comments by us after open box:

  • Titan Direct Drive - Direct feed with force multiplier extruder and high flow rate hot end for fast print. TPU flexi print ready.
  • Fast AC Heat Bed - Rapid heating up to over 80°C in 2 minutes
  • Synchronized Dual Z-axis - High speed and stable movement
  • Ultra-Quiet Stepper Driver - Exclusive stepper driver provide ultra quiet printing
  • Super Easy Assembly - Only 3 parts and 4 screws then good to go
  • TFT Colour Touch Screen - Clear and intuitive UI
  • Failure Detection - Filament Run-out Sensor for recovery and Resume Printing Function to resume printing in short power outage
  • Larger Rotary Knob - Easier to do the leveling
  • Clean Cable Management - Artillery put efforts into this issue and made the cable super tidy and clean
  • Carborundum glass platform - Steadier temperature. Can upgrade to Wham Bam PEX Flex System for better result
  • Now supported by Cura 4.8 - Cura 4.8 and Windows 10 ready, machine and printing profile included in latest Cura
  • Expendable slot for BL touch - Slot is prepared for the optional future upgrade of BL touch
Addify Review: This printer has all the functions and even more that a good Marlin printer and middle tier printer has, can be directly compared to CR-6 SE and even better, can imagine to put it in place to compare with CR-10S PRO V3 with Direct Drive. The only disadvantage for this printer is a smaller user community due to it is still brand new. But who hasn't been green? There wasn't even a community of Creality back in the old days. So, if you ask us you should buy Genius or Creality Ender 3 Pro or V2? To be honest Ender 3 V2 can hardly compare to this machine with all Genius's functionalities. Genius? Yes, it is kinda genius. Which one you should buy? It is up to you but most of our staff have bought this after trying it. #GGWP.

User Friendly

Things come pretty straight forward and intuitive on Artillery Genius. It has good cable management to make it neat. The UI is pretty easy to use. The USB and memory card slot is top facing of the printer base which is very easy to access. The overall experience is not difficult to notice Artillery put a lot of efforts in ergonomics.

Precise and Reliable

Every single part carries out a fast and smooth printing yet they are accurate and silent. Genius is equipped with double Z-axis which is usually available with the higher tier machines.

Neat & Tidy

Cables are well organised and assembly is super easy - just 4 screws and few cables to connect then it is ready to print. It has a clean cable management grouped the cables together and discreetly, makes the printer looks really tidy and professional.

Soft Materials Ready

The Titan Direct Drive is the best selling point. You may probably find it is difficult to get a titan direct drive on a beginner or intermediate level printer in the market, especially in smaller machines. This is ready to print TPU out of the box which indeed save your time and money to buy a direct drive and DIY.

Failure Prevention

The printer comes with the filament runout sensor so it can stop printing when there is any brokage or running out of filament.

Meanwhile, its power failure detection further prevent failure by the resume fucntion after the power recovered shortly.

Radid Heat Up

The AC heat bed can heat up rapidly to 80 degrees within 2 minutes. The nozzle also heat up so fast which you will not be wasting time waiting.

Easy Access to Slots

Most of the popular printers out their have their Micro SD card and USB slots mounted on their PCB therefore they are on the side which is inconvinent to access. Artillery Genius? Of course Genius will not have this low level error and put this in their consideration. Top facing, easy access, lovely printing experience.

Colour Touch Screen

TFT touch screen for easier control.

Dual Z-Axis

The synchronised Dual Z axis system makes printing steadier and more accurate.

Z Nut Coupler

Ultra Quiet Printing

3D Printing Nerd Artillery Genius Review

3DPrintFarm Artillery Genius Unbox & Setup

3DPrintFarm First Look at the Artillery Genius

Technical Specification

Artillery GeniusDESCRIPTION
Layer Resolustion±0.1mm
Product Dimensions & Weight (W x D x H)430 x 390 x 590 mm | 8.9kg
Maximum Build Volume (W x D x H)

220 x 220 x 250 mm

Molding TechnologyFDM
XYZ Position Precision0.05, 0.05, 0.1mm
Nozzle Diameter0.4mm
Nozzle TypeVolcano
Maximum Print Speed150 mm/s
Maxiumum Travel Speed250 mm/s
Hotbed Temperature130°C
Nozzle Temperature≤240°C
Filament Diameter1.75mm
Power

400W

Support Materials

PLA, TPU, ABS, Flexible Materials

ConnectivityMicro SD, USB
Slicing softwareSimplify3d, Cura, Creality Slicer, Reptier-Host

You might also like

Product added to wishlist
Product added to compare.

Addify uses cookies to optimize your experience. By continuing to browse our site, you consent to the use of these cookies. You may visit our Privacy Policy page to learn more.