Creality CR10 V3 3D Printer

Delivered within 3-4 weeks

(For CR10 V3 we order on demand only. It usually takes 7 to 14 days for delivery. Please contact us if you have enquiry, thank you.)

Creality released their CR10 version 3 to supersede their version 2 with improvements on stability, highlights their direct drive which was not available on V2.

  • Direct feed system
  • Using genuine E3D titan extruder 
  • All metal hot end
  • Dual cooling fan outlet for better heat-dissipated
  • Filamnent sensor enable print resume after run ot of filament
  • Mean Well 350W power supply
  • Reinforced side braces provided a stiff structure



Ender 3 V2 - the upgraded classic printer in 2020

CR-10 V3 3D Printer

Dual Port Hot Port Cooling Fans: Dual-port cooling fan extruder. Every heat-dissipated and cooling down immediately, reducing plugging and poor-spillage ensure models with high quality.

Titan Direct Drive: The 3d printer equipped with genuine Titan Direct Drive, the torque of the stepper motor is lower. Its more precise to control the feed-in filament, great at printing the soft filament like TPU.

TMC2208 Motherboard: Upgraded ultra-silent motherboard, this Creality 3d printer is more cost-effective and running more stable.

Manual Leveling(Changeable auto-leveling):BL touch(Auto-Leveling Device)can be added by yourself, enjoying more fun of DIY your own Creality 3d printer

Resume Printing Function: Recover from potential print failures before they happen

Filament Sensor(Optimize Structure): This design in Creality 3d printer will save your filaments when a strike occurs.

24V Branded Power Supply: The Creality CR-10 V3 3D printer, solid 350W branded power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100℃.

Dual Z Axes

Branded New UI

Ender 3 V2 - Integrated compact design

10 new enchancements

(Compare to V1, 1 enhancement compare to V2)
CR-10CR-10 V2CR-10 V3
One Port Hot End Cooling FanDual Port Hot Port Cooling FansDual Port Hot Port Cooling Fans
Bowden ExtruderBowden Extruder (Changeable Titan Direct Drive)Titan Direct Drive
Normal DriveTMC2208 MotherboardTMC2208 Motherboard
Manual LevelingManual Leveling (Changeable auto-leveling)Manual Leveling (Changeable auto-leveling)
Plastic Extruding KitAll-metal Extruding KitAll-metal Extruding Kit
NoResume Printing FunctionResume Printing Function
NoFilament SensorFilament Sensor (Optimize Structure)
12V Ordinary Power Supply24V Branded Power Supply24V Branded Power Supply
Single Z-axisDual Z-axisDual Z-axis
Normal UIBrand New UIBrand New UI

CR-10 V3 vs CR-10 V2

Direct Drive vs Bowden Extruder

All-metal Hot End
High-standard V-Shaped Profile
High-standard V-Shaped Profile
Dual Port Cooling Fans
Dual Port Cooling Fans
Ultra quiet TMC2208 motherboard
Ultra quiet TMC2208 motherboard
Power Resume Filament Sensor
Power Resume Filament Sensor
350W Branded Power Supply
350W Branded Power Supply
BL-Touch Supported (Not Included)
BL-Touch Supported (Not Included)
Titan Direct Drive Great At Printing TPU
Titan Direct Drive Great At Printing TPU
Firm Triangular Structure
Firm Triangular Structure

Titan Direct Drive

Precise And Smooth Extrusion

Equipped with genuine Titan direct drive, the torque of the stepper motor is lower. It is more precise to control the feed-in filament, great at printing the soft filaments like TPU.

Ender 3 V2 - better V-slot

Dual Port Fan Cooling

Dual-port cooling fan extruder, evenly heat-dissipated and cooling down immediately. Reducing plugging and poor-spillage ensures models with high quality.

Cooling improvementTransport tube temperatureOverall printing precision
Ender 3 V2 - silent motherboard let you also print at night

A New Touch All Metal Frame

High quality V-Profile selected, more stable without any vibration, smoothly printed-out with high accuracy.

Ender 3 V2 - smart sensor for resume printing

Proven performance
Branded Power Supply

Solid 350W branded power supply pairs with thermally efficient bed heater. Allows for rapid heating to 100°C

Quality Branded Power SupplyHeating Speed-up
Ender 3 V2 - Brand new XY-axis tensioner

Ultra Silent Motherboard

Self-developed industrial-graded motherboard and TMC2208 ultra silent drive and adopted. Cost-effective, running more table, noise reduction, compression resistance.

Ender 3 V2 - all metal body

Resume Printing Function

Recover from potential print failures before they happen

Ender 3 V2 -

Filament Breakage Sensor

Save your filaments when a strike occurs

Triangle Structure Remarkably Stable

Ensure a solid dimensional stable work platform

Carborundum glass platform

High hardness carborundum increases viscosity and reduces warping.

Ender 3 V2 - all metal body

Strong Compatibility
Auto & Manual Leveling

BL touch can be added by yourself, enjoy more fun of DIY your own 3d printer

Technical Specification

Creality CR-10 V3 SpecsDESCRIPTION
Layer Thickness0.1-0.4mm
Product Dimensions & Weight (W x D x H)420 x 550 x 650 mm
Maximum Build Volume (W x D x H)

300 x 300 x 400 mm

Molding TechnologyFDM
Print Precision0.1mm
Hotbed Temperature<=100°C
Filament Diameter1.75mm
Support Materials


ConnectivitySD, Micro USB
Slicing softwareSimplify3d, Cura

Supported Materials
Print Technology
Machine Size
420 x 550 x 650
Printing Size
300 x 300 x 400mm
Filament Diameter
Country of Origin
Micro USB
SD Card
Slicing Software
Cura/ Simplify3D
Reference Code
No reviews
Product added to wishlist
Product added to compare.